Well Repair
If you suspect that there’s an issue with your deep-water well, it can be very difficult to diagnose the issue. All the action is happening out of sight, and truly understanding the issue might not be possible until you’ve completed the complicated task of lifting the water pipe and the submersible water pump out of the well.
However, observing the exact symptoms of your well’s issues can give you a hint as to where the problem may lie and what a well repair service will need to do. The following are the most common issues that occur with deep-water wells, possible causes, and the potential fixes that a professional can perform to get your well back in working order.
If you turn on the sink and no water is coming out, there are two possible issues. The first one (the one we hope for) is that the problem is a tripped circuit breaker and the power to the pump has simply been shut off. If this is the case, you only need to flip the breaker back on. However, if this is not the case, then the pump of the well itself is likely the issue.
Water levels could be causing the pump to struggle. In spring and summer, homeowners tend to use more water, and the water table can dip below the pump’s reach. Reducing water usage for a few days can allow the water table to rise, correcting the problem. The well will completely recover in the winter and early spring, making it a simple well repair. However, if the area is in a drought, the issue of water table levels could become much more severe.
The best (and most cost-effective) fix is to lower the pump deeper into the well by adding more piping at the top, allowing the pump to reach the water. If the well’s depth ends before the pump can be submerged, a new well is required.
Sputtering water means that there is air in the system, oftentimes coming in through a crack in the pump or piping. A professional can help pull the well and find the issue.